MSME TOOL ROOM, HYDERABAD
CENTRAL INSTITUTE OF TOOL DESIGN
(A Government of India Society - Ministry of MSME)
BALANGAR, HYDERABAD-500037
Phone: 040-23772749, 23776178, 23772747 Extn. 213, Fax: 040-23772658
Email: citdcadcam@citdindia.org
Website: www.citdindia.org
ELECTRONICS CORPORATION OF INDIA LIMITED
(A Govt. of India Enterprise)
ECIL P.O, HYDERABAD - 500 062, A.P. INDIA.
COMMON ADMISSION TEST
CITD is a pioneering Organization in India offering technical training at Post Graduate level in Tool Design and CAD/CAM, joins hands with Electronics Corporation of India Limited, a Public Sector giant in Electronics and IT training to offer the following Diploma programmes in the CITD campus at Balanagar, Hyderabad.
COURSE: POST GRADUATE DIPLOMA IN VLSI & EMBEDDED SYSTEMS
Duration: Six months
Eligibility: Degree in Eng. CSE /ECE / EEE & EIE / M .Sc (Electronics) or equivalent.
No. of seats: 40
Course Fee : Rs. 45,000/-
Course Contents:
VLSI Design methodology, Advanced Digital Design from front to back end using either Verilog HDL or VHDL which also includes Static Timing Analysis.(Array Design, Standard Cell based Design & SoC Design)
Analog & Mixed Signal Design (Front End to Back End Design)(First Institute in INDIA )
EDA TOOLS :
CADENCE, Tanner, Mentor Graphics, Xilinx. C Programming Concepts, Operating Systems internals & programming, Networking & Socket Programming, Microcontrollers Embedded System, KEIL Interfacing, Real Time Operating Systems.
Selection Procedure :
Admission will be based on a National level Common Admission Test to evaluate applicant's aptitude and Technical knowledge. The Test will be of 2 hrs duration comprising of objective type questions. The criterion for selection will be based on the applicant's performance in the test.
How to Apply :
Prescribed application form and prospectus (containing rules and syllabus for Entrance Examination) can be had from CAD/CAM Department, Central Institute of Tool Design, Hyderabad – 500 037, by paying cash or a crossed Demand Draft of Rs. 300/- (S.C/S.T candidates Rs. 100/-) drawn in favour of Principal Director, CITD, Hyderabad, on any Nationalized Bank, Preferably State Bank of Hyderabad, Balanagar branch, Hyderabad – 37. The S.C/S.T Category candidates need to enclose a copy of Cast Certificate attested by Gazetted officer.
Course fee: The fee is Rs. 45,000/- (Rupees Forty thousand only) payable in two installments.
First Installment of Rs. 25,000/- at the time counseling.
Second Installment of Rs. 20,000/- within 60 days i.e. on or before 19-03-2009.
IMPORTANT DATES
Last Date for submission of application forms : 22-12-2008.
Last Date for submission of application forms with late fee of Rs. 200/- : 25-12-2008.
Date of Entrance Exam : 04-01-2009.
Date of Counseling : 09-01-2009.
Date of Commencement of Course : 19-01-2009.
LIMITED HOSTEL ACCOMODATION AVAILABLE FOR OUTSTATION CANDIDATES ON PAYMENT BASIS
Registration Form
Prospects
CENTRAL INSTITUTE OF TOOL DESIGN
(A Government of India Society - Ministry of MSME)
BALANGAR, HYDERABAD-500037
Phone: 040-23772749, 23776178, 23772747 Extn. 213, Fax: 040-23772658
Email: citdcadcam@citdindia.org
Website: www.citdindia.org
ELECTRONICS CORPORATION OF INDIA LIMITED
(A Govt. of India Enterprise)
ECIL P.O, HYDERABAD - 500 062, A.P. INDIA.
COMMON ADMISSION TEST
CITD is a pioneering Organization in India offering technical training at Post Graduate level in Tool Design and CAD/CAM, joins hands with Electronics Corporation of India Limited, a Public Sector giant in Electronics and IT training to offer the following Diploma programmes in the CITD campus at Balanagar, Hyderabad.
COURSE: POST GRADUATE DIPLOMA IN VLSI & EMBEDDED SYSTEMS
Duration: Six months
Eligibility: Degree in Eng. CSE /ECE / EEE & EIE / M .Sc (Electronics) or equivalent.
No. of seats: 40
Course Fee : Rs. 45,000/-
Course Contents:
VLSI Design methodology, Advanced Digital Design from front to back end using either Verilog HDL or VHDL which also includes Static Timing Analysis.(Array Design, Standard Cell based Design & SoC Design)
Analog & Mixed Signal Design (Front End to Back End Design)(First Institute in INDIA )
EDA TOOLS :
CADENCE, Tanner, Mentor Graphics, Xilinx. C Programming Concepts, Operating Systems internals & programming, Networking & Socket Programming, Microcontrollers Embedded System, KEIL Interfacing, Real Time Operating Systems.
Selection Procedure :
Admission will be based on a National level Common Admission Test to evaluate applicant's aptitude and Technical knowledge. The Test will be of 2 hrs duration comprising of objective type questions. The criterion for selection will be based on the applicant's performance in the test.
How to Apply :
Prescribed application form and prospectus (containing rules and syllabus for Entrance Examination) can be had from CAD/CAM Department, Central Institute of Tool Design, Hyderabad – 500 037, by paying cash or a crossed Demand Draft of Rs. 300/- (S.C/S.T candidates Rs. 100/-) drawn in favour of Principal Director, CITD, Hyderabad, on any Nationalized Bank, Preferably State Bank of Hyderabad, Balanagar branch, Hyderabad – 37. The S.C/S.T Category candidates need to enclose a copy of Cast Certificate attested by Gazetted officer.
Course fee: The fee is Rs. 45,000/- (Rupees Forty thousand only) payable in two installments.
First Installment of Rs. 25,000/- at the time counseling.
Second Installment of Rs. 20,000/- within 60 days i.e. on or before 19-03-2009.
IMPORTANT DATES
Last Date for submission of application forms : 22-12-2008.
Last Date for submission of application forms with late fee of Rs. 200/- : 25-12-2008.
Date of Entrance Exam : 04-01-2009.
Date of Counseling : 09-01-2009.
Date of Commencement of Course : 19-01-2009.
LIMITED HOSTEL ACCOMODATION AVAILABLE FOR OUTSTATION CANDIDATES ON PAYMENT BASIS
Registration Form
Prospects
Principal Director
No comments:
Post a Comment