DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING
THAPAR UNIVERSITY, PATIALA –147004 (PUNJAB)
SIX WEEKS
SHORT TERM TRAINING PROGRAMME
ON
“ VLSI DESIGN, MICRO CONTROLLER AND PCB FABRICATION ”
(May 14 - June 22 ,2012) and (June 04 – July 13, 2012)
http://thapar.edu/userfiles/file/ECED%20Information%20Brochure(3).pdf
REGISTRATION FORM DOWNLOAD:
http://thapar.edu/userfiles/file/ECED%20Registration%20form.pdf
Chairman
Dr. Rajesh Khanna
Course Coordinator(s)
Mr. Mayank Kumar Rai
Mr. Sanjay Kumar
Organized by
DEPARTMENT OF ELECTRONICS AND
COMMUNICATION ENGINEERING
THAPAR UNIVERSITY
PATIALA –147004 (PUNJAB)
INTRODUCTION
The evolution of VLSI technology has been developed to the point where millions of transistors can be integrated on a single die or chip. Where IC once filled the role of subsystem components, partitioned at analog-digital boundaries, they now integrate complete systems on a chip by combining both analog and digital functions.
Embedded systems using microcontrollers run the computing devices hidden inside a vast array of everyday products and appliances such as cell phones, toys, handheld PDAs, cameras, and microwave ovens. Cars are full of them, as are airplanes,satellites, and advanced military and medical equipments. As applications grow increasingly complex, so do the complexities of the microcontroller based embedded computing devices.
The goal of this training is to develop a comprehensive understanding of the VLSI design and microcontroller-based embedded systems design. The students will also develop an understanding of the existing capabilities and limitations of various steps in overall design methodology including PCB design and fabrication.
COURSE CONTENTS
1. Introduction to digital VLSI design flow and overview of EDA tools.
2. Design and implementation of digital VLSI circuits using Mentor Graphic and ISE station (Xilinx) tools.
3. Embedded processor architecture and programming, Embedded Systems environment, current technological changes and new devices
4. Intel MCS51 Microcontroller (Architecture & Assembly Programming), exposure to KEIL & UMPS Software.
5. PIC Microcontroller Architecture Programming & exposure to Eclipse work bench based Hi – Tech PICC cross complier.
6. Computer Aided Design of PCB’s using ORCAD
7. PCB fabrication
• Laminate cutting
• Photolithography
• Etching
• Dip Coating
• Roller Tinning
• Drilling
WHO CAN ATTEND
Under–graduate students of Engineering Colleges from the stream of Electrical, Electronics & Communication Engineering, Electronics (Instrumentation & Control) and Computer Engineering
COURSE FEES
The course fee is Rs. 6000/- per student Boarding & lodging arrangement has to be made by students themselves.
However hostel facility can be provided to students on as per actual payment basis.
MODE OF PAYMENT
All remittances must be in the form of D.D. payable at Patiala drawn in favour of “HECED”.
(Candidates shall be selected on the first come first serve basis)
Please mail the duly filled registration form to:
Mr. Mayank Kumar Rai
Coordinator
Short Term Training Programme
VDMPF-2012,
Electronics & Communication
Engineering Department,
THAPAR UNIVERSITY
PATIALA – 147004 PUNJAB
E-mail: mkrai@thapar.edu
sanjay.kumar@thapar.edu
ABOUT THE UNIVERSITY
Thapar University, formerly, Thapar Institute of Engineering & Technology (Deemed University) is one of the pioneer technical institutes of our country. It was founded in 1956 and is currently imparting UG, PG and Doctoral programmes in all major disciplines of engineering, technology, management and sciences. It is known for its highly spirited, dedicated and distinguished human resource personnel & for its quality.
For further details contact
Dr. Rajesh Khanna,
Professor & Head, ECED
Mr. Mayank Kumar Rai,
Assistant Professor, ECED
Mr. Sanjay Kumar,
Assistant Professor, ECED
Department of Electronics & Communication Engineering
THAPAR UNIVERSITY
PATIALA -147001 PUNJAB
Ph.: (0175): 2393083 (O)
Fax: (0175): 2393005, 2364498
E-mail: heced@thapar.edu, mkrai@thapar.edu , sanjay.kumar@thapar.edu
Details about the programme are available on website: www.thapar.edu
THAPAR UNIVERSITY, PATIALA –147004 (PUNJAB)
SIX WEEKS
SHORT TERM TRAINING PROGRAMME
ON
“ VLSI DESIGN, MICRO CONTROLLER AND PCB FABRICATION ”
(May 14 - June 22 ,2012) and (June 04 – July 13, 2012)
http://thapar.edu/userfiles/file/ECED%20Information%20Brochure(3).pdf
REGISTRATION FORM DOWNLOAD:
http://thapar.edu/userfiles/file/ECED%20Registration%20form.pdf
Chairman
Dr. Rajesh Khanna
Course Coordinator(s)
Mr. Mayank Kumar Rai
Mr. Sanjay Kumar
Organized by
DEPARTMENT OF ELECTRONICS AND
COMMUNICATION ENGINEERING
THAPAR UNIVERSITY
PATIALA –147004 (PUNJAB)
INTRODUCTION
The evolution of VLSI technology has been developed to the point where millions of transistors can be integrated on a single die or chip. Where IC once filled the role of subsystem components, partitioned at analog-digital boundaries, they now integrate complete systems on a chip by combining both analog and digital functions.
Embedded systems using microcontrollers run the computing devices hidden inside a vast array of everyday products and appliances such as cell phones, toys, handheld PDAs, cameras, and microwave ovens. Cars are full of them, as are airplanes,satellites, and advanced military and medical equipments. As applications grow increasingly complex, so do the complexities of the microcontroller based embedded computing devices.
The goal of this training is to develop a comprehensive understanding of the VLSI design and microcontroller-based embedded systems design. The students will also develop an understanding of the existing capabilities and limitations of various steps in overall design methodology including PCB design and fabrication.
COURSE CONTENTS
1. Introduction to digital VLSI design flow and overview of EDA tools.
2. Design and implementation of digital VLSI circuits using Mentor Graphic and ISE station (Xilinx) tools.
3. Embedded processor architecture and programming, Embedded Systems environment, current technological changes and new devices
4. Intel MCS51 Microcontroller (Architecture & Assembly Programming), exposure to KEIL & UMPS Software.
5. PIC Microcontroller Architecture Programming & exposure to Eclipse work bench based Hi – Tech PICC cross complier.
6. Computer Aided Design of PCB’s using ORCAD
7. PCB fabrication
• Laminate cutting
• Photolithography
• Etching
• Dip Coating
• Roller Tinning
• Drilling
WHO CAN ATTEND
Under–graduate students of Engineering Colleges from the stream of Electrical, Electronics & Communication Engineering, Electronics (Instrumentation & Control) and Computer Engineering
COURSE FEES
The course fee is Rs. 6000/- per student Boarding & lodging arrangement has to be made by students themselves.
However hostel facility can be provided to students on as per actual payment basis.
MODE OF PAYMENT
All remittances must be in the form of D.D. payable at Patiala drawn in favour of “HECED”.
(Candidates shall be selected on the first come first serve basis)
Please mail the duly filled registration form to:
Mr. Mayank Kumar Rai
Coordinator
Short Term Training Programme
VDMPF-2012,
Electronics & Communication
Engineering Department,
THAPAR UNIVERSITY
PATIALA – 147004 PUNJAB
E-mail: mkrai@thapar.edu
sanjay.kumar@thapar.edu
ABOUT THE UNIVERSITY
Thapar University, formerly, Thapar Institute of Engineering & Technology (Deemed University) is one of the pioneer technical institutes of our country. It was founded in 1956 and is currently imparting UG, PG and Doctoral programmes in all major disciplines of engineering, technology, management and sciences. It is known for its highly spirited, dedicated and distinguished human resource personnel & for its quality.
For further details contact
Dr. Rajesh Khanna,
Professor & Head, ECED
Mr. Mayank Kumar Rai,
Assistant Professor, ECED
Mr. Sanjay Kumar,
Assistant Professor, ECED
Department of Electronics & Communication Engineering
THAPAR UNIVERSITY
PATIALA -147001 PUNJAB
Ph.: (0175): 2393083 (O)
Fax: (0175): 2393005, 2364498
E-mail: heced@thapar.edu, mkrai@thapar.edu , sanjay.kumar@thapar.edu
Details about the programme are available on website: www.thapar.edu
No comments:
Post a Comment